FABSPEED XPERTUNE PERFORMANCE SOFTWARE FOR 996 PORSCHE 911 GT3

SKU: FS.POR.996GT3.ET
$1,811.95

In Stock

Shipping in 5 hours 5 minutes
ß
OEM-quality fitment for precise installation.
Sourced from certified, top-tier automotive brands.
Share:

Fabspeed XperTune Performance Software for 996 Porsche 911 GT3

Fabspeed’s XperTune Performance Software for the 996 Porsche 911 GT3 is the calibration the first water-cooled GT3 never received, because the factory file had emissions targets, worldwide fuel quality and warranty margin to answer to before it answered to the driver. Fabspeed’s tuners in Fort Washington, Pennsylvania write the file specifically for your car and the parts fitted to it, rather than issuing a map and hoping, and they deliver it through a handheld device that talks to the OBD-II port. The 996’s ECU traditionally demanded bench flashing, which meant unbolting the unit and posting it to a tuner; that is no longer how this works. Fabspeed quotes 381 horsepower and 284 lb-ft going in and 406 horsepower and 314 lb-ft coming out, and the thirty lb-ft matters more than the headline on an engine that rewards being driven on the torque curve rather than the limiter. On a Mezger 996 GT3 that is now firmly a collector car, a calibration you can reverse in minutes is the right kind of modification.

Features

  • Custom calibration written for your specific vehicle and modification list
  • Handheld tuner included; flashing happens through the OBD-II port
  • No ECU removal and no mail-in, so the car never leaves your garage
  • Flash back to the factory file and back again at any time, as often as you like
  • One to two business day turnaround on the custom file
  • Gains arrive across the range without costing cold running or drivability
  • Backed by the Fabspeed Lifetime Warranty

Specifications

  • 996 GT3 stock: 381 hp / 284 lb-ft (Fabspeed’s quoted baseline)
  • 996 GT3 tuned: 406 hp / 314 lb-ft
  • Gain: +25 hp / +30 lb-ft
  • Engine: 3.6L flat-six
  • Flash method: Included handheld tuner via the OBD-II port
  • Tune turnaround: 1 to 2 business days
  • Computer requirement: PC running Windows (Mac OS is not supported)

What’s Included

  • XperTune handheld tuner, pre-configured for the 996 GT3
  • Custom ECU calibration written for your vehicle
  • Tuning guide and ECU Tuning Information form

Applications

  • Porsche 911 GT3: 996 | 1999-2005 | 3.6L F6

Notes

  • The handheld device marries to your vehicle and cannot be used on a second car
  • Fabspeed lists this software as fitting all 996 GT3 models from 1999 to 2005, and quotes a 381 hp baseline. The earlier 1999-2001 cars were rated lower from the factory, so owners of those should confirm expected figures with us before ordering.
  • You need access to a PC running Windows to send your factory file to Fabspeed and to load their calibration onto the handheld. Mac OS is not supported.
  • Review the tuning guide and email the completed ECU Tuning Information form to Fabspeed, since that form is what makes the file specific to your car
  • Power and torque figures are taken from a specific vehicle at ambient conditions. Results vary with the car, its modifications and the conditions on the day.
  • Special requests and tune file upgrades may be subject to additional fees
  • The 997.1 and 997.2 GT3 use different ECUs and take their own versions of this software, 997.1 here (FS.POR.997GT3.ET) and 997.2 here (FS.POR.9972GT3.ET)
  • Commonly paired with the Fabspeed Sport Headers for 996 Porsche 911 GT3 and the Fabspeed Carbon Competition Air Intake System for 996 Porsche 911 GT3 (FS.POR.996GT3.COMPAI)
  • Exhaust options for this chassis include the Sport X-Pipe, the Competition X-Pipe, the Muffler Bypass Pipes and the Maxflo Performance Exhaust System
  • Browse the full Fabspeed range for the 996 GT3

Frequently Asked Questions

  • Which 996 GT3 models does this fit? Fabspeed lists it for all 996 GT3 cars with the 3.6L engine from 1999 to 2005, which covers both the early and the later versions. The quoted stock figure of 381 hp describes the later car, so owners of a 1999 to 2001 GT3 should ask us to confirm expected numbers for their specific model before ordering.
  • How much power does it add? Fabspeed quotes 381 hp and 284 lb-ft stock going to 406 hp and 314 lb-ft tuned, a gain of 25 horsepower and 30 lb-ft. The torque figure is the one owners notice, because it arrives through the mid-range where a 996 GT3 is actually driven rather than only near the limiter. Results vary with the car and conditions.
  • Do I have to send my ECU away to be tuned? No. The 996 ECU traditionally required bench flashing, meaning the unit came out of the car and went in the post, leaving the owner without the car for a week or more. The XperTune Performance Software is delivered through a handheld that connects to the OBD-II port, so nothing is removed and nothing is shipped.
  • Is a Windows computer required? Yes. A PC running Windows is needed to send your factory file to Fabspeed and to load the returned calibration onto the handheld. Mac OS is not supported, so arrange access to a Windows machine before ordering rather than after the handheld has arrived.
  • Can I return the car to standard? Yes, and on a car of this age and value that matters. The handheld retains your factory file, so flashing back to stock for a pre-purchase inspection, a dealer visit or a sale takes minutes and requires no shipping. You can return to the Fabspeed calibration afterwards at any point on that same vehicle.
  • Does it work with Fabspeed exhaust hardware for the 996 GT3? That is the intended use. Fabspeed writes the file to whatever you declare on the ECU Tuning Information form, so a 996 running Sport Headers and an X-pipe receives a calibration written for that combination rather than a generic map. Owners who add parts later should contact Fabspeed about a revised file, noting that upgrades may carry a fee.

About Fabspeed

Fabspeed Motorsport builds its exhaust, intake and software products in a 26,000 square foot facility in Fort Washington, Pennsylvania, a shop that regularly hosts Porsche Club of America, Ferrari, McLaren and Lamborghini club events. Every system is developed in house, from design and engineering through dyno testing, street trials and racing. Fabspeed works alongside race engine builders and tuners in Italy, Germany and the United States, and fabricates its systems from aerospace-grade austenitic stainless steel, titanium and carbon fiber.


Reviews

There are no reviews yet.

0.00

Average of 0 reviews

0 reviews
0 reviews
0 reviews
0 reviews
0 reviews
Be the first to review “FABSPEED XPERTUNE PERFORMANCE SOFTWARE FOR 996 PORSCHE 911 GT3”

Your email address will not be published. Required fields are marked *

We want you to feel confident before making your purchase. Here are a few important details to help you better understand this product and how it fits into your space.

  • Please review the product dimensions carefully to ensure the right fit for your space
  • Color may vary slightly due to lighting and screen settings
  • Materials and finishes are selected for both durability and visual appeal
  • Some items may require simple assembly upon delivery
  • Perfect for both everyday use and long-term comfort

If you have any questions about this product, feel free to reach out to our support team. We're here to help you make the right choice.

Fast Worldwide Shipping

Tracked dispatch on all in-stock orders.

Expert Support

Our team knows cars — get real advice.

Secure Checkout

Encrypted payments you can trust.

We use cookies to improve your experience. By continuing, you agree to our cookie policy.

I Accept