SUPPORT CONTACT: info@automotiveriser.com | Expert Support | Wholesale Support

All

Coilovers, LAMBORGHINI, Lamborghini Gallardo, Nitron Suspension, Suspension Systems

NITRON ELEC-TRON R1 COILOVER KIT FOR LAMBORGHINI GALLARDO [NTCLA010ER1]

Name: NITRON ELEC-TRON R1 COILOVER KIT FOR LAMBORGHINI GALLARDO [NTCLA010ER1]
SKU: NTCLA010ER1
Price: 5800.00 USD
Availability: InStock

SKU: NTCLA010ER1

Nitron Suspension

$5,800.00

In Stock

Shipping in 5 hours 18 minutes

Ask a Question Add to Wishlist Compare

OEM-quality fitment for precise installation.

Sourced from certified, top-tier automotive brands.

Nitron elec-TRON R1 Coilover Kit for Lamborghini Gallardo

The Lamborghini Gallardo responds well to a properly developed suspension setup, and the Nitron elec-TRON R1 delivers electronic damping control through Nitron’s proportional solenoid valve, managed by the Nitron DCU. The DCU is required for the system to operate; it reads data on the car’s attitude and the forces acting on it, adjusting damping every 5 milliseconds in response to braking, cornering, and acceleration without any manual input from the driver. The hardware traces directly back to the R3 platform, so what you’re getting is proven race-derived componentry packaged into a more accessible, straightforward setup that doesn’t ask much of the driver to get the most out of the Gallardo on road or track. Every kit is custom built, custom sprung, and fully serviceable.

elec-TRON

Nitron’s elec-TRON system starts with a proprietary proportional solenoid valve fitted to each individual shock, giving the DCU precise, independent damping control at every corner. The system monitors g-load, vehicle speed, road conditions, and driver inputs simultaneously, making damping adjustments every 5 milliseconds. For reference, a human eye blink takes somewhere between 100 and 150 milliseconds. That processing speed means the suspension is reacting to what the road and the driver are doing in real time, not catching up after the fact.

Standalone Electronic Damping System

The Nitron DCU is required for the elec-TRON R1 on the Lamborghini Gallardo and is sold separately. It’s the brain behind the elec-TRON system, transforming a conventional passive damper setup into a precision semiactive platform. Working in conjunction with Nitron’s elec-TRON valve, the DCU continuously processes data from the car every 5 milliseconds; assessing vehicle attitude, braking forces, cornering loads, and acceleration inputs to determine the correct valve position and damping level at any given moment. The result is a suspension system that isn’t set to a fixed damping rate but is constantly optimizing grip and comfort in real time based on what the car is actually doing. The DCU is fitted with an adjustable control knob giving the driver access to a range of pre-installed damping maps; Rain, Tour, Sport, and Race; each tuned for a specific driving context. Damping continues to be adjusted continuously within whichever map is selected, so the driver sets the overall character and the system handles the rest.
- Supplied with a custom or universal wiring harness
- Utilizes Arm Cortex-M4 processor
- Independent control of 4 electronic dampers
- 6 position rotary control switch or visual rotary display and control allows user to access a number of pre-installed damping maps (3 passive / 3 adaptive)
- Two 3 axis accelerometers
- 3 axis gyroscope
- 200Hz damping control rate
- Configured for application location and settings
- Ideal for resto-mod applications
- Fully resin bonded

Unique Technology

Nitron builds every shock around precision components that go through a thorough design and development process long before final assembly. The modular construction gives engineers the room to develop each application properly on its own terms, without cutting corners on part quality or how components work together under load. Everything is machined to tight tolerances and inspected individually by trained technicians; quality control isn’t a final step here, it runs through the entire process. New materials, finishes, and processes are validated extensively before they’re brought into production, with proprietary Nitron technologies woven throughout to produce shocks that hold up against the competition on both road and track. That level of engineering discipline is what the brand has been built on.
- Basic Damper Design:
  1. End Eye / Top Mount
  2. Damper Piston & Shim Stack
  3. Shaft / Rod
  4. Floating / Separator Piston
  5. Suspension Oil
  6. Compressed Nitrogen Gas

Bespoke Engineering

Nitron doesn’t start with a generic damper and work backward from there. Every application is developed from the ground up, with components, spring rates, and damping characteristics determined by the specific platform rather than borrowed from something adjacent. The geometry, weight distribution, and suspension travel of the Lamborghini Gallardo shape the design from the start, not as corrections added later. That’s what separates a kit engineered for this car from one that was simply made to fit it.

Features

Shares core technology with the R3 kit
No manual damping adjustments are required, fully controlled by the solenoid valve
Internal reservoir type
Full alloy body
Preload adjuster
Nitrogen gas charged
Precision bearing spacers supplied as required
Consists of 4 coilovers and adjustable top mounts
Hand made to order

Specifications

Coilover Type: elec-TRON R1
Rear Suspension Type: OEM
Droplinks Included: No
Recommended Spring Rates:
- FRS – Fast Road Spec:
  - Front: 550lbs/inch (96N/mm)
  - Rear: 508lbs/inch (89N/mm)
- TDS – Track Day Spec:
  - Front: 750lbs/inch (131N/mm)
  - Rear: 508lbs/inch (89N/mm)

Applications

Lamborghini Gallardo: LP560-4 | 2003-2013

Other Suspension Kits for Lamborghini Gallardo

Notes

This kit requires the Nitron elec-TRON DCU to work
If your Gallardo was optioned with the factory front axle lift, Nitron offers two routes; the elec-TRON R1 with FAL Cylinders, which integrates with the existing factory hydraulic system, or the elec-TRON R1 with Standalone FAL, which replaces it entirely with Nitron’s own setup
Custom spring rates also available, please contact us directly here for more information or for a consultation on custom rates
Images used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
Precision bearing spacers supplied as required

Frequently Asked Questions

Is the Nitron DCU included, and is it required? The Nitron DCU is not included but is required for the system to operate. It continuously processes data from the car every 5 milliseconds, assessing vehicle attitude, braking forces, cornering loads, and acceleration inputs to determine the correct valve position and damping level at any given moment. Without it, the elec-TRON shocks cannot function as intended.
What damping maps are available and how are they accessed? The DCU comes with a 6-position rotary control switch giving the driver access to pre-installed damping maps; Rain, Tour, Sport, and Race; covering both passive and adaptive modes. Each map is calibrated for a specific driving context, and damping continues to be adjusted continuously within whichever map is selected. The driver sets the overall character; the system handles the rest.
Are there versions of this kit that integrate with or replace the factory lift system? Yes. The elec-TRON R1 is also available in FAL Cylinders and Standalone FAL variants for Gallardo models equipped with or wanting a front axle lift system. The FAL Cylinders variant integrates with the factory lift hardware, while the Standalone FAL replaces it with Nitron’s own setup.
Can I run custom spring rates? Yes. Recommended rates are available for both Fast Road Spec and Track Day Spec configurations, but custom spring rates are available on request.

About Nitron Suspension

Nitron Suspension has been at the forefront of precision suspension engineering since 1998, founded by Guy Evans with the goal of building high-performance shocks for enthusiasts and professionals alike. Over 200 dealers now carry Nitron products across Europe, Asia, the US, Australasia, and Africa. In 2008, the company moved into a dedicated facility in the UK’s Motorsport Valley, adding dynamometers, 5-axis CNC machines, and 3D CAD capabilities to support both growing demand and continued product development. A second expansion came in 2023 with a new office in Murrieta, California. The team behind every Nitron product draws from deep backgrounds in machining, materials technology, hydraulics, bike engineering, and F1 racing, with many engineers bringing firsthand experience as competitive drivers and riders. That depth of knowledge across both the technical and competitive sides of motorsport shapes every product Nitron develops.

Reviews

There are no reviews yet.

0.00

Average of 0 reviews

0 reviews

Be the first to review “NITRON ELEC-TRON R1 COILOVER KIT FOR LAMBORGHINI GALLARDO [NTCLA010ER1]”

We want you to feel confident before making your purchase. Here are a few important details to help you better understand this product and how it fits into your space.

Please review the product dimensions carefully to ensure the right fit for your space
Color may vary slightly due to lighting and screen settings
Materials and finishes are selected for both durability and visual appeal
Some items may require simple assembly upon delivery
Perfect for both everyday use and long-term comfort

If you have any questions about this product, feel free to reach out to our support team. We're here to help you make the right choice.

Fast Worldwide Shipping

Tracked dispatch on all in-stock orders.

Expert Support

Our team knows cars — get real advice.

Secure Checkout

Encrypted payments you can trust.

Your Cart

Add $500.00 more to get free shipping!

No products in the cart.

Please change your search criteria and try again

Return to Shop

Urban Automotive Lower Ducktail Extension Spoiler for Lamborghini Urus S [430-0032]

$1,799.00

CAPRISTO High-Performance Exhaust Systems

Product Size Guide

Please refer to the general size reference below to better understand how this product may fit into your space. Dimensions may vary slightly depending on the design and materials.

Category	Small	Medium	Large
Decor & Accessories	Up to 10″	10″ – 20″	20″+
Tables	Up to 30″	30″ – 60″	60″+
Seating	1 Seater	2–3 Seater	4+ Seater
Storage Units	Compact	Standard	Large Capacity
Lighting	Small Fixture	Standard Fixture	Large Fixture

Note: For exact product dimensions, please refer to the specifications section above. This guide is intended as a general reference only.

NITRON ELEC-TRON R1 COILOVER KIT FOR LAMBORGHINI GALLARDO [NTCLA010ER1]

$5,800.00 Add to Cart

NITRON ELEC-TRON R1 COILOVER KIT FOR LAMBORGHINI GALLARDO [NTCLA010ER1]