NITRON NTR-R1 COILOVER KIT FOR E82 BMW 1M COUPE [NTCBM025R1]
In Stock
Nitron NTR-R1 Coilover Kit for E82 BMW 1M Coupe
The BMW 1M Coupe sits on the E82 platform with a chassis that’s widely regarded as one of the most engaging in BMW’s modern lineup, but the factory suspension was tuned for a broad audience rather than the driver who wants to find the limit and work with it. The Nitron NTR-R1 coilover kit for the 1M Coupe closes that gap with precision-engineered, combined 2-way damping adjustment drawn directly from the R3 race platform, sharing core components with a kit built for professional competition. Coilover and divorced rear suspension configurations are both available to suit different build requirements. There’s no remote canister to package around, and every unit is individually hand-built with ultra-low friction components that deliver consistent, fade-resistant damping from the street to the circuit. Hard-anodized titanium finish parts and high-grade materials keep corrosion out and weight in check, and with each kit custom built, custom sprung, and fully serviceable, it’s an investment that holds up well beyond a single season.
Coilover vs Divorced Rear Suspension
- The E82 1M Coupe NTR-R1 is available with two rear suspension configurations depending on how the car is being built. The coilover setup combines the spring and damper into a single unit, keeping things compact and straightforward for road and general track use. The divorced configuration separates the spring and damper, allowing each to be positioned and tuned independently; this is the preferred approach for dedicated race builds where maximizing suspension geometry and setup flexibility matters more than packaging simplicity. Nitron offers both to make sure the R1 works with the build rather than against it.
Unique Technology
- Every Nitron shock is built from precision components that go through a thorough design and development process before reaching final assembly. The modular construction gives engineers the flexibility to approach each application properly, without compromising on how individual parts are made or how they perform together under load. Components are machined to tight tolerances and inspected one by one by trained technicians throughout production, not just at the end. New materials, finishes, and processes are validated extensively before adoption, with proprietary Nitron technologies integrated throughout to produce shocks that consistently hold up against the competition on road and track. That engineering standard is what the brand has been built on since 1998.
- Basic Damper Design:
- End Eye / Top Mount
- Damper Piston & Shim Stack
- Shaft / Rod
- Floating / Separator Piston
- Suspension Oil
- Compressed Nitrogen Gas
- Basic Damper Design:
Bespoke Engineering
- Nitron doesn’t adapt a generic damper to fit the E82 1M Coupe. Every application goes through a dedicated development process, with components, spring rates, and damping characteristics engineered around the specific platform rather than the category it belongs to. Geometry, weight distribution, and suspension travel are factored into the design from the start, not compensated for after the fact. The result is a kit built for the 1M Coupe specifically, not one that was built broadly and happens to fit.
Features
- Coilover or divorced rear suspension types
- Internal reservoir type
- 2-way combined adjustment
- Full alloy body
- Preload adjuster
- Combined 24 clicks of adjustment
- Nitrogen gas charged
- Precision bearing spacers supplied as required
- Consists of 4 coilover assemblies and top mounts
- Hand made to order
Specifications
- Coilover Type: NTR-R1
- Adjustment Type: 2-way combined
- Adjustment: 24 clicks combined
- Rear Suspension Types:
- Coilover
- Divorced
- Droplinks Included: No
- Recommended Spring Rates:
- FRS – Fast Road Spec:
- Front: 685lbs/inch (120N/mm)
- Rear:
- Coilover: 350lbs/inch (61N/mm)
- Divorced: 685lbs/inch (120N/mm)
- TDS – Track Day Spec:
- Front: 799lbs/inch (140N/mm)
- Rear:
- Coilover: 400lbs/inch (70N/mm)
- Divorced: 799lbs/inch (140N/mm)
- FRS – Fast Road Spec:
Applications
- BMW 1M Coupe: E82 | 2011-2012
Other Suspension Kits for E82 1M Coupe
Notes
- Custom spring rates also available, please contact us directly here for more information or for a consultation on custom rates
- Images used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
- Precision bearing spacers supplied as required
Frequently Asked Questions
- At what point does the divorced rear configuration make more sense than the coilover setup on the 1M Coupe? When the build is moving toward dedicated circuit use and geometry optimization becomes a priority over installation simplicity. The divorced setup allows the spring and damper to be positioned and adjusted independently, which opens up setup options that a coilover configuration physically can’t offer. For road use or occasional track days, the coilover setup covers everything needed without the added complexity.
- Why are the rear spring rates so different between the coilover and divorced configurations? The divorced configuration runs a significantly stiffer rear spring because the spring and damper are no longer working as a combined unit. With each component positioned independently, the spring rate needs to be higher to achieve the same wheel rate and chassis response. Running coilover spring rates in a divorced setup would result in an under-sprung rear end that doesn’t respond correctly under load.
- Does the NTR-R1 share any components with Nitron’s professional race kits? Yes. The NTR-R1 draws its damping adjustment directly from the R3 race platform and shares core components with a kit built for professional competition. The hardware isn’t a consumer adaptation of race technology; it’s the same componentry packaged into a more accessible format.
About Nitron Suspension
Nitron Suspension has been at the forefront of precision suspension engineering since 1998, founded by Guy Evans with the goal of building high-performance shocks for enthusiasts and professionals alike. Over 200 dealers now carry Nitron products across Europe, Asia, the US, Australasia, and Africa. In 2008, the company moved into a dedicated facility in the UK’s Motorsport Valley, adding dynamometers, 5-axis CNC machines, and 3D CAD capabilities to support both growing demand and continued product development. A second expansion came in 2023 with a new office in Murrieta, California. The team behind every Nitron product draws from deep backgrounds in machining, materials technology, hydraulics, bike engineering, and F1 racing, with many engineers bringing firsthand experience as competitive drivers and riders. That depth of knowledge across both the technical and competitive sides of motorsport shapes every product Nitron develops.
0.00
Average of 0 reviews
We want you to feel confident before making your purchase. Here are a few important details to help you better understand this product and how it fits into your space.
- Please review the product dimensions carefully to ensure the right fit for your space
- Color may vary slightly due to lighting and screen settings
- Materials and finishes are selected for both durability and visual appeal
- Some items may require simple assembly upon delivery
- Perfect for both everyday use and long-term comfort
If you have any questions about this product, feel free to reach out to our support team. We're here to help you make the right choice.
Fast Worldwide Shipping
Tracked dispatch on all in-stock orders.
Expert Support
Our team knows cars — get real advice.
Secure Checkout
Encrypted payments you can trust.
We use cookies to improve your experience. By continuing, you agree to our cookie policy.
I AcceptYour Cart
Add $500.00 more to get free shipping!
Product Size Guide
Please refer to the general size reference below to better understand how this product may fit into your space. Dimensions may vary slightly depending on the design and materials.
| Category | Small | Medium | Large |
|---|---|---|---|
| Decor & Accessories | Up to 10″ | 10″ – 20″ | 20″+ |
| Tables | Up to 30″ | 30″ – 60″ | 60″+ |
| Seating | 1 Seater | 2–3 Seater | 4+ Seater |
| Storage Units | Compact | Standard | Large Capacity |
| Lighting | Small Fixture | Standard Fixture | Large Fixture |
Note: For exact product dimensions, please refer to the specifications section above. This guide is intended as a general reference only.



![KW V3 COILOVER KIT FOR G80 / G82 BMW M3 / M4 [352200EB]](https://automotiveriser.com/wp-content/uploads/2026/08/KW-V3-Coilover-Kit-for-G80-BMW-M3-and-G82-BMW-M4-Whats-in-the-Box-1000x1000-1-300x300.jpg)
![OHLINS ROAD & TRACK COILOVERS FOR 997 PORSCHE 911 CARRERA / CARRERA S [POS MZ20S1]](https://automotiveriser.com/wp-content/uploads/2026/08/7d8bcaf0f2d8104886fd0f1fab317bc0L-300x300.webp)
![OHLINS ROAD & TRACK COILOVERS FOR TESLA MODEL 3 / MODEL Y [TES MU02S1]](https://automotiveriser.com/wp-content/uploads/2026/08/8d3816a3d405185d19d300c4fcb5b2eaL-300x300.webp)
![OHLINS TTX COILOVERS FOR C190 MERCEDES-AMG GT / GT S / GT R [MEV MX00S1]](https://automotiveriser.com/wp-content/uploads/2026/08/Mercedes20AMG20GT20C190-28_pair20copy-300x300.jpg)
![Urban Automotive Lower Ducktail Extension Spoiler for Lamborghini Urus S [430-0032]](https://automotiveriser.com/wp-content/uploads/2026/09/No_photo_description_available_-2-300x300.jpg)

Reviews
There are no reviews yet.