SUPPORT CONTACT: info@automotiveriser.com | Expert Support | Wholesale Support

All

Coilovers, Nitron Suspension, PORSCHE, Porsche 911, Porsche 911 Carrera 4, Porsche 911 Carrera 4S, Porsche 911 Turbo, Porsche 911 Turbo S, Suspension Systems

NITRON NTR-R3 COILOVER KIT W/ STANDALONE FAL FOR 996 PORSCHE 911 CARRERA 4, CARRERA 4S, TURBO, AND TURBO S [NTCPO027R3+FAL]

Name: NITRON NTR-R3 COILOVER KIT W/ STANDALONE FAL FOR 996 PORSCHE 911 CARRERA 4, CARRERA 4S, TURBO, AND TURBO S [NTCPO027R3+FAL]
SKU: NTCPO027R3+FAL
Price: 11945.00 USD
Availability: InStock

SKU: NTCPO027R3+FAL

Nitron Suspension

$11,945.00

In Stock

Shipping in 17 hours 22 minutes

Ask a Question Add to Wishlist Compare

OEM-quality fitment for precise installation.

Sourced from certified, top-tier automotive brands.

Nitron NTR-R3 Coilover Kit w/ Standalone FAL for 996 Porsche 911 Carrera 4, Carrera 4S, Turbo, and Turbo S

The 996 Porsche 911 Carrera 4, Carrera 4S, Turbo, and Turbo S share a platform with genuine performance capability, and the factory suspension, while capable, leaves real performance on the table when the driving gets serious. The Nitron NTR-R3 coilover kit, supplied here with Nitron’s Standalone Front Axle Lift system, is built for that level of development work; independent 3-way damping adjustment with separate high and low speed compression control gives drivers and engineers the range needed to properly dial the car in across different circuits and conditions. A large diameter piston and ultra-strong piston rod sit at the core of the design, providing the damping control and feedback that serious setups depend on. Droplinks are included so the installation is complete without sourcing additional hardware. Both front and rear units use hose mounted reservoirs with quick-release dry-breaks fitted at both ends, keeping high and low speed compression adjustment accessible without adding complexity to the installation. The included FAL addresses the practical challenge of running a lowered 996 on public roads, raising the front axle 25mm at the shock to clear driveways, speed bumps, and parking obstacles without affecting the suspension setup or how the car drives once conditions return to normal. The R3 is a proven race winner with lap records across a wide range of international motorsport formulas, and every kit is custom built, custom sprung, and fully serviceable.

The Nitron Front Axle Lift (FAL)

Running a lowered 996 Porsche 911 Carrera 4, Carrera 4S, Turbo, or Turbo S on the road comes with a familiar set of frustrations; steep driveways, speed bumps, and parking lot ramps that sit just low enough to make every approach a calculation. The Nitron Standalone Front Axle Lift system is built around that specific problem. With 25mm of lift available at the front axle, it clears the obstacles that lowered ride heights make problematic without requiring any changes to the suspension setup and without affecting how the car performs once you’re back on the road or circuit. It’s a practical addition to a performance suspension package, not a compromise of one.
- 250W pump
- 25mm lift height
- Typical lift time under 3-seconds
- Audible in-cabin warning system
- Switch with built-in warning light
- Auto off function
- Protects your car from damage caused by steep driveways and speed bumps
- Compatible with a wide range of suspension setups

Unique Technology

Nitron builds every shock from precision components that go through a thorough design and development process long before final assembly. The modular construction gives engineers the flexibility to approach each application on its own terms without cutting corners on part quality or how components perform together under load. Everything is machined to tight tolerances and inspected individually by trained technicians; that quality control runs through every stage of production rather than being concentrated at the end. New materials, finishes, and processes are validated extensively before adoption, with proprietary Nitron technologies integrated throughout to produce shocks that consistently hold up against the competition on road and track. That engineering standard is what the brand has been built on since 1998.

Bespoke Engineering

Nitron doesn’t adapt a generic damper to fit the 996 Porsche 911 Carrera 4, Carrera 4S, Turbo, and Turbo S; they engineer one around each variant. Every application goes through a dedicated development process where components, spring rates, and damping characteristics are determined by the specific platform, not borrowed from something close enough. The geometry, weight distribution, and suspension travel of each model are part of the design from the beginning, not corrections introduced later. That’s the difference between suspension that works with a car and suspension that was developed for it.

Features

Hose reservoir type
Dry-breaks for front and rear reservoirs
16 clicks of high compression
26 clicks of low compression
24 clicks of rebound
Preload adjuster
3-way independent adjustment
Full alloy body
Nitron FAL raises 25mm at the shock
Consists of 4 coilovers, reservoirs, hoses, droplinks, and top mounts (+FAL kit)
FAL kit contains all components (cylinders, hydraulic lines, pump, wiring loom and controller)
Hand made to order

Specifications

Coilover Type: NTR-R3 with standalone FAL
Adjustment Type: 3-way independent
Adjustment: 16 clicks of high compression / 26 clicks of low compression / 24 clicks of rebound
Reservoir Type: Hose
Rear Suspension Type: OEM
Droplinks Included: Yes

Applications

Porsche 911 Carrera 4: 996 | 1997-2005
Porsche 911 Carrera 4S: 996 | 2002-2005
Porsche 911 Turbo: 996 | 2001-2005
Porsche 911 Turbo S: 996 | 2005

Other Suspension Kits for 997 C4, C4S, Turbo, and Turbo S

Notes

Fits AWD models only
Custom spring rates also available, please contact us directly here for more information or for a consultation on custom rates
Images used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

Frequently Asked Questions

Can the R3 be used as a starting point for circuit development and then refined over time, or does it require a fully developed setup from day one? The R3 is built around the idea that setup development is an ongoing process. Every kit is custom sprung to order, and the three independent adjustment circuits give you the range to start from a road-biased baseline and progressively refine the setup as you learn the car across different circuits and conditions. You’re not locked into a fixed position from the start.
Is the FAL system compatible with the coilover setup regardless of how aggressive the ride height is set? Yes. The FAL operates independently of the damper setup and works within the suspension travel available at whatever ride height the car is running. It is not limited to a specific height range within the coilover’s adjustment and does not interact with spring rates or valving in any way.

About Nitron Suspension

Nitron Suspension has been at the forefront of precision suspension engineering since 1998, founded by Guy Evans with the goal of building high-performance shocks for enthusiasts and professionals alike. Over 200 dealers now carry Nitron products across Europe, Asia, the US, Australasia, and Africa. In 2008, the company moved into a dedicated facility in the UK’s Motorsport Valley, adding dynamometers, 5-axis CNC machines, and 3D CAD capabilities to support both growing demand and continued product development. A second expansion came in 2023 with a new office in Murrieta, California. The team behind every Nitron product draws from deep backgrounds in machining, materials technology, hydraulics, bike engineering, and F1 racing, with many engineers bringing firsthand experience as competitive drivers and riders. That depth of knowledge across both the technical and competitive sides of motorsport shapes every product Nitron develops.

Reviews

There are no reviews yet.

0.00

Average of 0 reviews

0 reviews

Be the first to review “NITRON NTR-R3 COILOVER KIT W/ STANDALONE FAL FOR 996 PORSCHE 911 CARRERA 4, CARRERA 4S, TURBO, AND TURBO S [NTCPO027R3+FAL]”

We want you to feel confident before making your purchase. Here are a few important details to help you better understand this product and how it fits into your space.

Please review the product dimensions carefully to ensure the right fit for your space
Color may vary slightly due to lighting and screen settings
Materials and finishes are selected for both durability and visual appeal
Some items may require simple assembly upon delivery
Perfect for both everyday use and long-term comfort

If you have any questions about this product, feel free to reach out to our support team. We're here to help you make the right choice.

Fast Worldwide Shipping

Tracked dispatch on all in-stock orders.

Expert Support

Our team knows cars — get real advice.

Secure Checkout

Encrypted payments you can trust.

Your Cart

Add $500.00 more to get free shipping!

No products in the cart.

Please change your search criteria and try again

Return to Shop

Urban Automotive Lower Ducktail Extension Spoiler for Lamborghini Urus S [430-0032]

$1,799.00

CAPRISTO High-Performance Exhaust Systems

Product Size Guide

Please refer to the general size reference below to better understand how this product may fit into your space. Dimensions may vary slightly depending on the design and materials.

Category	Small	Medium	Large
Decor & Accessories	Up to 10″	10″ – 20″	20″+
Tables	Up to 30″	30″ – 60″	60″+
Seating	1 Seater	2–3 Seater	4+ Seater
Storage Units	Compact	Standard	Large Capacity
Lighting	Small Fixture	Standard Fixture	Large Fixture

Note: For exact product dimensions, please refer to the specifications section above. This guide is intended as a general reference only.

NITRON NTR-R3 COILOVER KIT W/ STANDALONE FAL FOR 996 PORSCHE 911 CARRERA 4, CARRERA 4S, TURBO, AND TURBO S [NTCPO027R3+FAL]

$11,945.00 Add to Cart

NITRON NTR-R3 COILOVER KIT W/ STANDALONE FAL FOR 996 PORSCHE 911 CARRERA 4, CARRERA 4S, TURBO, AND TURBO S [NTCPO027R3+FAL]