SUPPORT CONTACT: info@automotiveriser.com | Expert Support | Wholesale Support

All

ADRO ARD Prepreg Carbon Front Intake Panel for 992.1 Porsche 911 GT3 [R23A10-1211]

Name: ADRO ARD Prepreg Carbon Front Intake Panel for 992.1 Porsche 911 GT3 [R23A10-1211]
SKU: R23A10-1211
Price: 4200.00 USD
Availability: InStock

SKU: R23A10-1211

$4,200.00

In Stock

Shipping in 19 hours 5 minutes

ADRO ARD Prepreg Carbon Front Intake Panel for the 992.1 Porsche 911 GT3, optimized as a single aerodynamic surface with the ARD race front splitter. Sold as one panel with mounting hardware. Must be run with the ADRO ARD race front splitter, SKU R23A10-1221.

Ask a Question Add to Wishlist Compare

OEM-quality fitment for precise installation.

Sourced from certified, top-tier automotive brands.

ADRO ARD Prepreg Carbon Front Intake Panel for 992.1 Porsche 911 GT3

The ADRO 992.1 GT3 ARD Front Intake Panel is the upper half of ADRO Racing Division’s front-end aero solution for the 911 GT3 (992.1, all trims), and it works as one surface with the ARD race front splitter beneath it. Where the splitter manages air under the nose, this panel controls what the bumper openings do with the air passing through them, and the two were solved together rather than designed as separate parts. Like the rest of the ARD program its geometry came out of ADRO’s in-house AOX adjoint CFD software and was calibrated on track at Cadwell Park with Formula 1 driver Liam Lawson. It is laid up in prepreg carbon fiber to ADRO’s OEM fitment standard.

Engineered by Algorithm

AOX, ADRO’s Aerodynamic Optimization eXperience software, uses advanced adjoint methods to search for optimal aerodynamic geometry against a defined objective. ADRO sets the downforce target, the balance the car needs to hold and the physical limits the surface may move within, then the solver runs repeated CFD iterations, moving the geometry incrementally until it converges on the best available answer. The intake panel’s surfaces are an output of that process rather than a styling exercise, which is what separates the ARD line from ADRO’s street aero.

Track Validation

Before the ARD package reached production ADRO took it to Cadwell Park in the United Kingdom and calibrated it with current Formula 1 driver Liam Lawson, whose feedback shaped the final setup. ADRO reports the complete AOX package generates 2.3 times the downforce of a stock GT3 in its high downforce track setting for a 0.28 increase in drag, measuring 2888N at 180kph against 598N stock, with a deliberate rearward balance shift that suits the GT3’s weight distribution. ADRO also recorded mid-corner speed gains above 20kph in corners taken over 130kph. Those figures describe the full package rather than the ADRO 992.1 GT3 ARD Front Intake Panel alone.

ADRO 992.1 GT3 ARD Front Intake Panel Construction

The panel is laid up in prepreg carbon fiber and autoclave cured, a process that holds resin content and weave alignment far more consistently than wet lay-up and yields a part that is both lighter and more dimensionally stable under aerodynamic load. It replaces the factory intake panel outright rather than sitting over it, and mounts using the GT3’s existing hardware without cutting.

Features

Adjoint CFD optimized surfaces generated in ADRO’s in-house AOX software
Autoclave cured prepreg carbon fiber for consistent weave and dimensional stability
Designed as one aerodynamic surface with the ARD race front splitter
Direct replacement for the factory 992.1 GT3 intake panel, no cutting required
OEM-quality fitment to the factory 992.1 GT3 front bumper
Part of the ADRO Racing Division AOX program for the 992.1 GT3
Track calibrated at Cadwell Park with a current Formula 1 driver

What’s Included

Front intake panel in prepreg carbon fiber (x1)
Mounting hardware (x1 set)

Applications

Porsche 911 GT3: 992.1 | 2022-2024

Notes

Must be used with the ADRO ARD race front splitter (R23A10-1221), the two parts are designed as a single aerodynamic surface
Each ADRO 992.1 GT3 ARD Front Intake Panel is made to order by ADRO with an approximate three month lead time
Sold as one front intake panel with mounting hardware
Professional installation is recommended. For fitment questions on your car, contact us.

Frequently Asked Questions

What is the ADRO 992.1 GT3 ARD Front Intake Panel made from? It is laid up in prepreg carbon fiber and autoclave cured, which holds resin content and weave alignment more consistently than wet lay-up and produces a lighter part that stays dimensionally stable under aerodynamic load.
Do I need the ARD splitter as well? Yes. The panel and the ARD race front splitter were optimized together as one surface and ADRO specifies them as a pair, so the panel is not intended to be run with the factory splitter.
Does it fit every 992.1 GT3? ADRO lists it for all 992.1 GT3 trims. It is not designed for the 992.2 GT3, which uses a different front end.
Does the ADRO 992.1 GT3 ARD Front Intake Panel replace the factory panel? Yes. It is a direct replacement that mounts to the existing hardware rather than an overlay, and no cutting is required.
How much downforce does the ARD package add? ADRO reports the complete AOX package produces 2888N of downforce at 180kph against 598N for a stock GT3 in high downforce track mode, a 2.3 times increase for a 0.28 rise in drag. Those figures are for the full package, not for the panel on its own.
What is the lead time? It is made to order with an approximate three month lead time from ADRO. Contact us for the current build schedule.

About ADRO

ADRO is an aftermarket manufacturer specializing in carbon fiber aerodynamic components for modern performance and sports cars, with aero engineered by former F1 and OEM designers. ADRO develops its parts using CFD simulation with a focus on adding usable downforce at minimal drag cost while preserving each vehicle’s factory balance and lines, producing them in high-grade prepreg carbon fiber. Bulletproof Automotive carries ADRO’s aero program for enthusiasts looking to make their cars faster where it counts.

Reviews

There are no reviews yet.

0.00

Average of 0 reviews

0 reviews

Be the first to review “ADRO ARD Prepreg Carbon Front Intake Panel for 992.1 Porsche 911 GT3 [R23A10-1211]”

We want you to feel confident before making your purchase. Here are a few important details to help you better understand this product and how it fits into your space.

Please review the product dimensions carefully to ensure the right fit for your space
Color may vary slightly due to lighting and screen settings
Materials and finishes are selected for both durability and visual appeal
Some items may require simple assembly upon delivery
Perfect for both everyday use and long-term comfort

If you have any questions about this product, feel free to reach out to our support team. We're here to help you make the right choice.

Fast Worldwide Shipping

Tracked dispatch on all in-stock orders.

Expert Support

Our team knows cars — get real advice.

Secure Checkout

Encrypted payments you can trust.

Your Cart

Add $500.00 more to get free shipping!

No products in the cart.

Please change your search criteria and try again

Return to Shop

Urban Automotive Lower Ducktail Extension Spoiler for Lamborghini Urus S [430-0032]

$1,799.00

CAPRISTO High-Performance Exhaust Systems

Product Size Guide

Please refer to the general size reference below to better understand how this product may fit into your space. Dimensions may vary slightly depending on the design and materials.

Category	Small	Medium	Large
Decor & Accessories	Up to 10″	10″ – 20″	20″+
Tables	Up to 30″	30″ – 60″	60″+
Seating	1 Seater	2–3 Seater	4+ Seater
Storage Units	Compact	Standard	Large Capacity
Lighting	Small Fixture	Standard Fixture	Large Fixture

Note: For exact product dimensions, please refer to the specifications section above. This guide is intended as a general reference only.

ADRO ARD Prepreg Carbon Front Intake Panel for 992.1 Porsche 911 GT3 [R23A10-1211]

$4,200.00 Add to Cart

ADRO ARD Prepreg Carbon Front Intake Panel for 992.1 Porsche 911 GT3 [R23A10-1211]