SUPPORT CONTACT: info@automotiveriser.com | Expert Support | Wholesale Support

All

Eventuri - Carbon Fiber Air Intake Systems, Intake Kits, TOYOTA, Toyota GR Corolla

EVENTURI GLOSS CARBON INTAKE SYSTEM FOR E210 TOYOTA GR COROLLA [EVE-GR4CR-CF-INT]

Name: EVENTURI GLOSS CARBON INTAKE SYSTEM FOR E210 TOYOTA GR COROLLA [EVE-GR4CR-CF-INT]
SKU: EVE-GR4CR-CF-INT
Price: 1645.00 USD
Availability: InStock

SKU: EVE-GR4CR-CF-INT

Eventuri - Carbon Fiber Air Intake Systems

$1,645.00

In Stock

Shipping in 7 hours 11 minutes

Ask a Question Add to Wishlist Compare

OEM-quality fitment for precise installation.

Sourced from certified, top-tier automotive brands.

Eventuri Gloss Carbon Intake System for E210 Toyota GR Corolla

The GR Corolla Intake is an advancement of the GR Yaris system, which was meticulously designed through comprehensive data logging of temperatures, flow rates, and dyno testing. As the engine is turbocharged, the primary considerations during development were heat and volume. The intake system is specifically designed to deliver the highest possible flow rate while maintaining the lowest feasible intake temperatures. Each component is carefully designed to supply the turbo with a seamless and unrestricted flow path. A sealed system design surpasses the OEM airbox’s Intake Air Temperatures (IAT”s) while simultaneously increasing internal volume to diminish the pressure drop, thereby reducing the turbo’s pumping losses. This enhanced efficiency permits the turbo to reach peak boost more quickly, producing a net gain in performance.

The Eventuri Difference

The GR Corolla Eventuri system features patented carbon fiber housings, designed to provide an aerodynamically efficient airflow path from the filter to the turbo. Unlike conventional cone filters with heat shields, this system leverages the Venturi effect to maintain laminar airflow and reduce drag on the turbo.

Dyno Testing

The GR Corolla intake has undergone independent testing by reputable tuners like Limit1 in the US. Back-to-back dyno runs were performed on the same day, first using the OEM airbox, then with the Eventuri intake. The tests showed improvements in torque and power throughout the entire RPM range, delivering better throttle response and quicker acceleration.

Intake Air Temperature

The intake system, unlike the stock airbox, does not draw air from the engine bay, which helps lower intake air temperatures (IATs). This reduction in IATs contributes to the performance gains observed in dyno testing. Data logs show lower temperatures at both the intake and post-intercooler, demonstrating the system’s efficiency.

Filter Housing Assembly

The filter housing includes a custom generation 2 filter, aluminum inlet cowl, stainless steel bracket, and an integrated MAF section. The carbon pod surrounds the reverse-mounted filter, channeling airflow directly to the MAF section and turbo inlet tube without sharp directional changes, unlike the OEM system. This streamlined design reduces drag and enhances turbo performance.

Bespoke Cone Filter

The system uses a large bespoke filter with a diameter of 210mm (8.3″), capable of flowing up to 940 CFM at 28″ H2O. The ISO-tested filter meets OEM filtration standards and remains dry, while the signature flow cones support the Venturi housing for optimal airflow.

Patented Technology

The patented filter housing gradually reduces in cross-sectional area, accelerating airflow and maintaining laminar flow, similar to a large velocity stack. The design ensures an even velocity profile as air exits the housing, contributing to overall performance.

Carbon Duct

The carbon duct channels ambient air from the front bumper to the filter housing. It maximizes the volume and seals against the filter housing with a rubber seal, preventing hot air from entering the system. The duct does not extend to the second grill opening to maintain airflow to the engine bay, reducing heat soak.

Rear Tube and EPDM Coupler

The rear tube, designed using Computational Fluid Dynamics (CFD), provides a smoother airflow path compared to the OEM tube. The EPDM coupler allows for engine movement while ensuring a secure seal between the tube and the filter housing.

Front Scoop

Located behind the grill, the front scoop directs ambient air into the intake system, helping to maintain low IATs when the car is in motion.

Features

Improved power and sound
Smoother airflow
Reduced IAT’s
Carbon duct
100% pre-preg carbon
Performance Increase: 15-17hp / 15-18ft-lb

Kit Contents

Bespoke high flow dry cone filter
CNC machined MAF boss and bracket mounts
Custom EPDM hose
Custom made hardware
Gloss carbon inlet duct
Gloss carbon patented venturi filter housing w/ integrated MAF section
Gloss carbon fiber rear tube
Laser cut front air scoop
Laser cut stainless steel brackets

Applications

Toyota GR Corolla: E210 (2023+) – 1.6L turbo I3

Notes

The system is also available in a matte carbon finish
Some images show Eventuri’s carbon engine cover
This item cannot be returned

Frequently asked Questions

Will the Eventuri Carbon Intake System fit my Toyota GR Corolla? Yes. The Eventuri Carbon Intake System fits the E210 Toyota GR Corolla (2023+) with the 1.6L turbocharged G16E three-cylinder engine. It is a direct-fit replacement for the factory intake and is offered in gloss or matte carbon fiber. Some listing images show Eventuri’s carbon engine cover, which is a separate product and not included with the intake.
How does the Eventuri intake work and how much power does it add? The sealed carbon housing isolates the filter from engine bay heat, lowering intake air temperatures, while the patented Venturi enclosure keeps airflow smooth and reduces pressure drop so the turbo spools more efficiently. On independent back-to-back dyno testing, Eventuri reports gains of 15-17 hp and 15-18 ft-lb across the rev range, with sharper throttle response.
Is the Eventuri GR Corolla intake a direct bolt-on installation? Yes. The intake is a direct-fit replacement for the factory airbox and installs using Eventuri’s included hardware, CNC-machined MAF boss and bracket mounts, and EPDM coupler. No cutting or permanent modification is required. The integrated MAF section houses the factory airflow sensor in its original position for a clean, reversible swap.
What is the Eventuri Carbon Intake System made from and how is the filter maintained? Every carbon component is manufactured from 100% pre-preg carbon fiber for consistent quality and durability under high underhood temperatures. The system uses a large bespoke dry cone filter measuring 210mm (8.3″) in diameter that meets OEM filtration standards. When replacement is due, it takes the Eventuri Type D filter (EVE-W210-FTR).
Can I return the Eventuri GR Corolla intake, and is it covered by warranty? No. This item cannot be returned, so confirm fitment and finish before ordering. It is fully backed by manufacturer warranty coverage, and damage-in-transit support is provided if the shipment arrives damaged. Because emissions regulations vary by region, review the emissions compliance notice and your local requirements before installing on a street-driven GR Corolla.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and tuning – all sharing a passion for cars and performance. After owning various intakes over many years for their own cars and being disappointed with the gains which seldom lived up to their claims – they decided to take things into our own hands and rewrite the book. To set a new benchmark in intake design and technology, above all – to engineer systems which provide real gains and then to publish genuine figures. Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dynamometer testing. They strive to publish all the development information to illustrate the depths they go to in bringing an intake from concept to reality. Only the best materials are selected for each component – even down to the choice of fasteners and fixings in order to ensure that the quality of the end product is second to none. After many years of disappointment with the usual aftermarket intakes, they are proud to be raising the bar and creating intake systems which are setting a new standard and genuinely improve the performance of your vehicle.

Reviews

There are no reviews yet.

0.00

Average of 0 reviews

0 reviews

Be the first to review “EVENTURI GLOSS CARBON INTAKE SYSTEM FOR E210 TOYOTA GR COROLLA [EVE-GR4CR-CF-INT]”

We want you to feel confident before making your purchase. Here are a few important details to help you better understand this product and how it fits into your space.

Please review the product dimensions carefully to ensure the right fit for your space
Color may vary slightly due to lighting and screen settings
Materials and finishes are selected for both durability and visual appeal
Some items may require simple assembly upon delivery
Perfect for both everyday use and long-term comfort

If you have any questions about this product, feel free to reach out to our support team. We're here to help you make the right choice.

Fast Worldwide Shipping

Tracked dispatch on all in-stock orders.

Expert Support

Our team knows cars — get real advice.

Secure Checkout

Encrypted payments you can trust.

Your Cart

Add $500.00 more to get free shipping!

No products in the cart.

Please change your search criteria and try again

Return to Shop

Urban Automotive Lower Ducktail Extension Spoiler for Lamborghini Urus S [430-0032]

$1,799.00

CAPRISTO High-Performance Exhaust Systems

Product Size Guide

Please refer to the general size reference below to better understand how this product may fit into your space. Dimensions may vary slightly depending on the design and materials.

Category	Small	Medium	Large
Decor & Accessories	Up to 10″	10″ – 20″	20″+
Tables	Up to 30″	30″ – 60″	60″+
Seating	1 Seater	2–3 Seater	4+ Seater
Storage Units	Compact	Standard	Large Capacity
Lighting	Small Fixture	Standard Fixture	Large Fixture

Note: For exact product dimensions, please refer to the specifications section above. This guide is intended as a general reference only.