OHLINS DFV ROAD & TRACK COILOVERS FOR FD3S MAZDA RX-7 [MAS MI10S1]

SKU: MAS Mi10S1
$3,000.00

In Stock

Shipping in 21 hours 8 minutes
ß
OEM-quality fitment for precise installation.
Sourced from certified, top-tier automotive brands.
Share:

Öhlins DFV Road & Track Coilovers for FD3S Mazda RX-7

The Mazda RX-7 FD3S already had one of the most celebrated chassis setups of its era, but the factory suspension was never the ceiling of what the platform could do. The Öhlins Road & Track coilover kit for the FD3S builds directly on that foundation; adding patented DFV damping technology, 25 clicks of individual compression and rebound adjustment, and aluminum ball joint top mounts at both ends. Whether the car spends most of its time on canyon roads, autocross courses, or circuit track days, this kit gives the RX-7’s near-perfect weight distribution the suspension hardware it deserves, without giving up the ride quality needed to get there and back comfortably.

DFV Technology and Track Performance

  • Öhlins’ Dual Flow Valve (DFV) technology is what separates the Road & Track series from conventional coilovers. A single turn of the gold knob clockwise engages race mode across all four damping zones at once; low-speed compression, high-speed compression, low-speed rebound, and high-speed rebound. The DFV internals respond quickly to surface changes on track, keeping the front tires loaded through corners and maintaining consistent contact under hard braking. An internal needle bleed valve also compensates for changes in fluid viscosity as the damper heats up, so performance stays consistent lap after lap without any driver input.

Construction and Adjustment

  • Front and rear each use an aluminum monotube shock absorber with individual spring preload adjusters and separate damper length adjusters, paired with aluminum ball joint top mounts. The front offers approximately 10-40mm of lowering adjustment with a 110N/mm spring rate; the rear provides approximately 5-35mm of adjustment at the same 110N/mm rate. The matched spring rates front and rear reflect the RX-7’s balanced weight distribution and keep the car’s natural handling balance intact. Ride height is adjusted by rotating the lower flange on the threaded body, leaving the spring seat in its optimal position at any height setting.

Features

  • DFV technology (Dual Flow Valve)
  • 1-way 25-click compression and rebound adjuster
  • Individual height adjustment
  • Rebuildable dampers for custom tuning
  • Corrosion salt spray tested (ISO 9227)
  • 2-year warranty

Specifications

  • Front
    • Aluminum monotube shock absorber
    • Spring preload adjuster
    • Separate damper length adjuster
    • Approximately 10-40mm lowering adjustment range
    • 110N/mm spring rate
    • Aluminum ball joint top mounts
  • Rear
    • Aluminum monotube shock absorber
    • Spring preload adjuster
    • Separate damper length adjuster
    • Approximately 5-35mm lowering adjustment range
    • 110N/mm spring rate
    • Aluminum ball joint top mounts

Applications

  • Mazda RX-7: FD3S | 1991-2002

Notes

  • Image(s) may differ from actual product

Frequently Asked Questions

  • Does this Öhlins Road & Track kit fit all FD3S Mazda RX-7 variants across the full 1991-2002 production run? Yes. The kit is compatible with all FD3S Mazda RX-7 variants from 1991 through 2002, covering all Type designations from Type I through Type VI.
  • Why do the front and rear use the same 110N/mm spring rate? The matched 110N/mm front and rear spring rate is intentional. The FD3S has a near-ideal weight distribution, and Öhlins tuned the spring rates to preserve that natural balance rather than skew the setup front to rear. This keeps the car’s handling character intact while adding the damping precision the platform is capable of.
  • What type of top mounts does this kit use? Both the front and rear use aluminum ball joint top mounts, which are included with the kit. Unlike some applications that retain the original rubber top mounts, the ball joint design reduces compliance and sharpens steering and suspension response.
  • How does the DFV adjuster work on the FD3S kit? Turning the gold knob clockwise engages race mode across all four damping zones simultaneously; low-speed compression, high-speed compression, low-speed rebound, and high-speed rebound. Reversing it returns the damper to road mode. No tools are required and no per-corner adjustments are needed.
  • Are the dampers rebuildable, and what warranty does Öhlins provide? Yes. All Öhlins Road & Track dampers are fully rebuildable and can be revalved or serviced over time. The kit is backed by a two-year limited warranty worldwide, and all shocks are corrosion salt spray tested to (ISO 9227) standards.

About Ohlins

For nearly 50 years, Öhlins has been a cornerstone of the motorsport, motorcycle, and automotive industries, guided by a clear mission to deliver uncompromising quality in products, service, and support from the MotoGP circuit to grassroots racing events in over 50 distributing countries. Trusted by aftermarket customers, OEM partners, and professional racing teams, the company designs and manufactures advanced suspension systems that push the limits of precision, control, and reliability. Rooted in a rich motorsport heritage and driven by a passion for innovation, Öhlins extends beyond its racing DNA to inspire riders and drivers everywhere with high-performance solutions that are rigorously developed, tested, and refined to transform vehicle dynamics. Through close collaboration with leading manufacturers and racing teams, the company sets the benchmark for suspension performance, integrating insights directly into its shock absorbers, front forks, steering dampers, and advanced electronic suspension systems for both OEM and aftermarket applications. Its products deliver track-proven performance with minimal modification, enabling professional competitors, enthusiasts, and everyday drivers to achieve greater comfort, control, and confidence.


Reviews

There are no reviews yet.

0.00

Average of 0 reviews

0 reviews
0 reviews
0 reviews
0 reviews
0 reviews
Be the first to review “OHLINS DFV ROAD & TRACK COILOVERS FOR FD3S MAZDA RX-7 [MAS MI10S1]”

Your email address will not be published. Required fields are marked *

We want you to feel confident before making your purchase. Here are a few important details to help you better understand this product and how it fits into your space.

  • Please review the product dimensions carefully to ensure the right fit for your space
  • Color may vary slightly due to lighting and screen settings
  • Materials and finishes are selected for both durability and visual appeal
  • Some items may require simple assembly upon delivery
  • Perfect for both everyday use and long-term comfort

If you have any questions about this product, feel free to reach out to our support team. We're here to help you make the right choice.

Fast Worldwide Shipping

Tracked dispatch on all in-stock orders.

Expert Support

Our team knows cars — get real advice.

Secure Checkout

Encrypted payments you can trust.

We use cookies to improve your experience. By continuing, you agree to our cookie policy.

I Accept