KW ESC Module for Audi RS5 [68510358]

SKU: 68510358
$663.95

In Stock

Shipping in 19 hours 11 minutes
ß
OEM-quality fitment for precise installation.
Sourced from certified, top-tier automotive brands.
Share:

KW ESC Module for Audi RS5

KW’s ESC Module for Audi RS5 is the small component that makes a proper coilover conversion possible on a car built around its own adaptive dampers. Remove those dampers and the car objects immediately, with fault codes and cluster warnings no amount of mechanical work will silence. This module, developed and built by KW in Fichtenberg, Germany, takes the place of the factory damper signal so the car accepts the change, and it keeps the in-cabin drive mode selection working as before. It is not a part anyone buys for its own sake; it is the part that lets the suspension underneath be chosen on merit rather than dictated by the wiring loom.

Why It Is Needed

  • Vehicles delivered with electronically controlled dampers expect to see them on the bus, and fitting conventional KW coilovers removes that hardware, which the control unit reads as a fault. The ESC Module for Audi RS5 supplies what the control unit is looking for, so the dashboard stays clean and the drive mode switch keeps functioning, while damping is set by hand at the coilover itself.

Features

  • The ESC Module for Audi RS5 prevents fault messages caused by removing the factory electronic dampers
  • Maintains in-cabin drive mode function after the factory dampers are removed
  • Application-specific to the vehicles listed under Applications
  • Connects into the existing factory damper wiring
  • No dealer coding required for the module
  • Shipping weight 5.5 lb; carton 4 x 4 x 4 in
  • Developed and manufactured in Fichtenberg, Germany

Applications

  • Audi RS5 Cabriolet: 2014-2015 | 4.2L V8
  • Audi RS5: 2013-2015 | 4.2L V8

Notes

  • Sold as a single module
  • The ESC Module for Audi RS5 is required only when the factory electronically controlled dampers are being removed; a car retaining its original adaptive dampers does not need it
  • Fit it alongside the coilover kit. For this chassis the matching kits are KW DDC Plug and Play Coilover Kit for Audi S3 (39010058).
  • KW builds cancellation modules for many chassis and they are not interchangeable; this part number is specific to the vehicles listed under Applications

Frequently Asked Questions

  • What does the KW ESC Module for Audi RS5 do? It replaces the signal the factory adaptive dampers send to the car once those dampers are removed for a KW coilover installation. Without it the car logs faults and puts warnings on the instrument cluster. The module keeps the vehicle electronically satisfied that its original suspension is still connected.
  • Do the in-cabin drive modes still work? Yes. The module maintains the function of the drive mode selection inside the cabin after the factory electronic dampers have been removed, so the mode switch continues to operate normally rather than returning an error. Damping itself is then set by hand on the KW coilovers.
  • Do I need this module with KW coilovers? Only if the car left the factory with electronically adjustable dampers. Where it did, removing that hardware to fit conventional coilovers requires this module to prevent fault codes and dashboard warnings. A car built without adaptive damping does not need it at all.
  • Is the ESC Module for Audi RS5 a plug-in installation? The module connects into the existing factory damper wiring in place of the original units. It is normally fitted at the same time as the coilover kit, since both jobs involve the same connectors, and no dealer coding or software work is required for the module itself.
  • Which vehicles does this module cover? This part number covers the Audi RS5 built between 2013 and 2015, across 2 listed variants shown under Applications. KW builds separate modules for other generations, so match the part to the exact chassis before ordering.
  • Where is the KW ESC Module for Audi RS5 made? KW designs and manufactures the module at its headquarters in Fichtenberg, Germany, alongside the coilover systems it is built to work with. KW has produced suspension there since 1995 and supplies vehicle manufacturers, professional tuners and race teams worldwide.

About KW

KW automotive has developed and built suspension in Fichtenberg, Germany since 1995, and supplies coilover systems to vehicle manufacturers, professional tuners and race teams worldwide. Every KW damper is engineered in house, validated on the company’s own 7-post shaker rig and kinematics test benches, and manufactured at the Fichtenberg headquarters rather than sourced from a contract supplier. The application list runs to more than 4,600 fitments, from road cars to GT racing machinery.

Reviews

There are no reviews yet.

0.00

Average of 0 reviews

0 reviews
0 reviews
0 reviews
0 reviews
0 reviews
Be the first to review “KW ESC Module for Audi RS5 [68510358]”

Your email address will not be published. Required fields are marked *

We want you to feel confident before making your purchase. Here are a few important details to help you better understand this product and how it fits into your space.

  • Please review the product dimensions carefully to ensure the right fit for your space
  • Color may vary slightly due to lighting and screen settings
  • Materials and finishes are selected for both durability and visual appeal
  • Some items may require simple assembly upon delivery
  • Perfect for both everyday use and long-term comfort

If you have any questions about this product, feel free to reach out to our support team. We're here to help you make the right choice.

Fast Worldwide Shipping

Tracked dispatch on all in-stock orders.

Expert Support

Our team knows cars — get real advice.

Secure Checkout

Encrypted payments you can trust.

We use cookies to improve your experience. By continuing, you agree to our cookie policy.

I Accept